Robotic Programming  Smart Z programming for Systematic Cleaning | Smart Z programming for Systematic Cleaning |
Robotic Balance  Retains its balance if it turns over | Rights itself when inverted |
Robotic Reverse  Reverses itself back into the water | If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter water |
Robotic Injury Protection  Safe when taken out of water while it is working | The impeller automatically stops within 1 second if it is taken out of water while it is working |
Robotic Self Preservation  Stops working in case some large foreign matter is obstructing it | The impeller stops working in case some large foreign matter is obstructing it |
Robotic Shut off  Shuts itself at the end of the cycle | Shuts itself at the end of the cycle |
Above Ground or In Ground  Suitability for type of pool | Above Ground and In-ground Residential and Commercial Pools |
Shape of Pool  Suitability for pool shapes | All Shapes |
Surface Type  Suitability for surface type | All Types - Tile (large & small), vinyl, Gunite, Fiberglass |
Coverage Surfaces  Suitability for pool areas | Floor, Walls and Coves |
Recommended Cleaning Area  Maximum Cleaning Area | 2100 Sq Ft in 2 hours |
Filtering or Suction Rate  Water which passes through the Robot in a given time | 18000 Litres/Hour |
Operating Cost per hour  Electricity cost per hour at municipal rates. | Rs 3 per hour |
Cycle Time and Timers  Time taken by the pool robot to complete a cycle and timer settings available on the robot | You can select from 3 settings 0.5h ( Pool size less than 500 Sq ft) , 1h (Pool Size less than 1000 Sq ft) or (2h Pool Size greater than 1000 Sq ft) |
Method of Movement  Type of movement | Linear Jet Propulsion |
Pool Cleaning Speed  Speed at which the pool robot cleans | Max 120㎡/h or 1300 Sq Ft /h |
Ground Moving speed  Speed at which the pool robot moves on the surface of the pool. | 780 metres/hour or 43 ft/minute |
Cleaning Roller Width  The width of the roller which scrubs and cleans | 34cm (Approximate 1.1 ft or 0.34 m) |
Maximum Length of Pool | 30 meter |
Floating Cable Standard Length  Length of the cable.. This can be extended also. This limits the width and length of cleaning area of the robot. | 15m , i.e 50 ft approximately |
Maximum Climbing Height  The maximum height which the pool robot can climb. It also mens the maximum depth the pool robot can clean. | 180 cm ( Approx 6 ft or 1.8 m) |
Filtration Area of Filter Bag | 0.2㎡ |
Pump Thrust  The higher the N ratiing the better it is for the suction and movement of the Robot. | 17N |
Filter Bag Porosity  The size of the pores on the filter bag | Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filter. |
Grade of Waterproof  Milagrow Robots comply with the international certification of water proof rating for electronic products. The main unit has the highest Water 'Ingress Protection' (IP) rating of 68. For Remote Control it has IP21 and for Power Supply it has a rating of IP23. | Milagrow Robots comply with the international certification of water proof rating for electronic products. The main unit has the highest Water 'Ingress Protection' (IP) rating of 68. |
Grade of Waterproof - Control Box  Milagrow Robots comply with the international certification of water proof rating for electronic products. The main unit has the highest Water 'Ingress Protection' (IP) rating of 68. Control Box has an IP 24. | IP 24 |
Wheel Type  Type of wheels | Impeller with Sponged Wheels, Abrasion Proof |
Scrubbing  Type of scrubbing | 4 Sponge wheels - 2 front and 2 back |
No of Drive Motors  Motors define clmbing ability | 2. They provide outstanding clmbing ability |
Cable Swivel  Angle which the cable can swivel | 360 Degress |
Filter Bag Location  Location of the fliter bag | Bottom of the body for easy cleaning |
Rust Proof  Being rust proof prolongs the life of the robot | Fully Rust Proof |
Storage Temperature for pool robot  Temperature at which the robot needs to be stored. | 0℃-40℃ |
Optimum Working Temperature  Temperature at which the robot works optimally | 10℃-32℃ |
Pool Robot Colors | Ivory |
Power Box  Water resistant | Water resistant |
Input Voltage  100-240VAC, 49.3-60.5Hz | 100-240VAC, 49.3-60.5Hz |
Output Voltage for Pool Robots | 29.5 V |
Rated Power  200W | 200W |
Dimension(L*W*H)  450*490*260mm | 450*490*260mm |
Packing Measurement(L*W*H) | 574*574*413mm |
Gross Weight | 19.2kg |
Host (Main Unit) | 1 |
Power Box | 1 |
User Manual | 1 |
Warranty Card | 1 |
Certificate of Quality | 1 |
Caddy Cart | Optional Rs 20000 |
Robot Warranty | 1 Year not including the wearable parts and accessories |
2020-04-09
First Milagrow product! very satisfied
I completely love this Milagrow pool robot. It cleans my swimming pool and the water is always clear and clean. This is the top pool robot ever invented. If you have a swimming pool I highly recommend you get the Milagrow swimming pool robot. It has saved my sanity and saved me tons of money because it saves 95% electricity, 30% chemicals and 90% water & 90% manpower.