Recently added item(s)
![]() | |
Robotic Programming ![]() | Smart Z programming for Systematic Cleaning |
Robotic Balance ![]() | Rights itself when inverted |
Robotic Reverse ![]() | If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter water |
Robotic Injury Protection ![]() | The impeller automatically stops within 1 second if it is taken out of water while it is working |
Robotic Self Preservation ![]() | The impeller stops working in case some large foreign matter is obstructing it |
Robotic Shut off ![]() | Shuts itself at the end of the cycle |
![]() | |
![]() | |
![]() | |
![]() | |
![]() | |
![]() | |
![]() |
Disclaimers:
- Specifications are subject to change without notice. Please call or write to us in case you would like to be doubly sure. For material which is not as per specifications, full refund is possible within 3 days of delivery or free replacement is available within 30 days of purchase.
- Press on
to expand and
to collapse the rows.
- Main Unit
- Power Box
- Remote Control
- Guide Vane
- Synchronous Belt 2
- Impeller
- Filter Bag
- Caddy Cart (Optional)
Reason
- The socket is not plugged in
- Connection is wrong
Solution
- Plug in the power lead
- Check connection.
Reason
- Impeller dirty
- Impeller is damaged
- Filter bag is full of dirt
Solution
- Clean the impeller
- Replace impeller.
- Clean the filter bag.
Reason
- • Synchronous belt is loose or broken on one side.
- •The filter bag is full of dirt
Solution
- •Replace synchronous belt
- • Clean the filter bag
Reason
- Filter bag is full of dirt
- Synchronous belt is loose or broken
- Sponge wheel wear
- Axis sleeves are worn out
Solution
- Clean the filter bag
- Replace synchronous belt
- Replace Sponge
- Replace axis sleeves
Reason
- The sponge wheel doesn't soak enough water
- It has air inside the machine
Solution
- Let the Robot be in water and make sure sponge wheel soaks enough, normal time is about 5 -15 minutes
- Turn the Milagrow RoboPhelps MPR1over and make sure air released
Reason
- Belt of filter bag is loose or broken.
Solution
- Replace filter bag or the belt.
Best investment so far!
I have been using the Milagrow pool cleaner for about 5 years and this is our first automatic pool cleaner. I typically run once a week and it keeps our pool floor clean and picks up even small particles as well as larger ones like leaves.
Great pool cleaner
I have bought a house with a large size swimming pool and we are completely new to pool maintenance. We called a pool company Milagrow to clean the pool. they gave me a demo, according my pool size they recommened Robophelps 40, Setup was super easy, just plug it in and let it do its thing. It was fascinating to watch it go around scrubbing-it even climbed the walls and went up the steps! It cleans the water line very well, gets all surfaces in the pool, and really has just impressed us. Thanks Milagrow
NO registration required!
If the question you have has not yet been answered here, use the form below to ask something about this addon.
- World's 1st Robot for Olympic Pools.
- Robotic 6th Sense.
- Cleans Pool Floor-Walls-Stairs-Coves.
- Cleans upto 8400 sq ft in 8 hours.
- Filters 40000 liters/hour.
- Smart Z programming.
- Suits all pool shapes, surfaces, and types.
- Can climb up to 6 ft.
- Saves upto 93% energy and 30% on pool chemicals.
- Can also be controlled by remote for specific cleaning.
- 8 Strong scrubbing wheels.
- 4 Climbing motors and 2 pump motors.
- 40m long cable with 360-degree swivel.
- 3 Time settings with maximum setting upto 8 hours.
- Injury protection.
- Multiple sensors or Minimum Human Intervention.
2020-04-21
Awesome time saving pool robot
Have spent hours in the past cleaning my pool on a daily basis, now I just drop Robophelps in the pool and It did a fantastic job of picking up debris including hair from the bottom of our pool. Easy to assemble, easy to clean and easy to install. I'm happy with the purchase and i also purchased the caddy cart. Very satisfied with my purchase.