Electronic Modules

Grid List

  1. 36mm Encoder DC Motor Pack

    36mm Encoder DC Motor Pack

    (0 ratings)

    Rs 23,190.00

    36mm Encoder DC Motor Pack includes two encoder motors, one encoder motor driver and various brackets and cables. It is designed to drive all kinds of transmission devices with precise control over the speed and movement. Learn More

  2. Optical Encoder Motor Pack- 25mm

    Optical Encoder Motor Pack- 25mm

    (0 ratings)

    Rs 8,990.00

    In contrast to the DC motor, a photoelectric encoder is added into the encoder motor for detecting speed which is fed back to the signal input terminal for PID control to implement servo control for the motor. Learn More

  3. 37mm DC Motor Robot Pack-Blue

    37mm DC Motor Robot Pack-Blue

    (0 ratings)

    Rs 8,990.00

    37mm diameter DC metal geared motor, together with a motor bracket, a shaft connector and a multipurpose wheel. The motor bracket included is suitable for 37mm motor and 25mm motor. The multipurpose wheel can be used as a timing pully, or a wheel hub, or a tank wheel. This 37mm DC Motor robot pack is gold,  Learn More

  4. 36mm Encoder DC Motor

    36mm Encoder DC Motor

    (0 ratings)

    Rs 8,990.00

    36mm Encoder DC Motor is designed to drive all kinds of transmission devices with precise control over the speed and movement. It can be connected with Me High-Power Encoder Motor Driver by using the 6P motor cable. You can control the diver through programming on the computer or connect it with Makeblock Orion mainboard via RJ25 cable. Learn More

  5. 36 DC Geared Motor 12V240RPM

    36 DC Geared Motor 12V240RPM

    (0 ratings)

    Rs 7,990.00

    36mm planetary gear reducing motor have better performance, higher torque. It can be used as the power motor of carts chassis or some high-performance small cars. Learn More

  6. 42BYG Through-type Lead Screw Stepper Motor

    42BYG Through-type Lead Screw...

    (0 ratings)

    Rs 6,990.00

    Makeblock 42BYG Through-type Lead Screw Stepper Motor is a special linear stepper motor equipped with a 312mm long T8 lead screw. The motion of the motor will be along a straight line when the T8 lead screw is meshing with the screw thread inside the motor.   Learn More

  7. 42BYG Geared Stepper Motor

    42BYG Geared Stepper Motor

    (0 ratings)

    Rs 6,990.00

    Makeblock 42BYG geared stepper motor is a simple, but very powerful stepper motor with high output torque and response speed but low noise and energy consumptionhas better performance. It comes with higher torque than 42BYG stepper motor. It can be used as the power motor of some high-performance machine. Learn More

  8. Me Auriga

    Me Auriga

    (0 ratings)

    Rs 5,990.00

    Me Auriga is the updated version of Orion which equipped with several sensors. The previous two red ports have been changed into four but remain the functions. Also, PORT5 is isolated only with serial communication function. So it can't be used to update program and is only for communication Learn More

  9. Me High-Power Encoder Motor Driver

    Me High-Power Encoder Motor Driver

    (0 ratings)

    Rs 5,990.00

    This module is the newer version of the original Me Encoder Motor Driver, which is capable of driving two encoder motors simultaneously. The chip inside this driver integrates the PID control algorithms which can be used to control and feed back the speed and the movement of the motors. Learn More

  10. LCD Control Panel

    LCD Control Panel

    (0 ratings)

    Rs 3,990.00

    LCD Control Panel is one of the electronic modules of mGiraffe. Connect it to switching modules EXP1 and EXP2. The LCD Control Panel consists of a LCD module, a rotary encoder, a buzzer and a TF card slot, and is mainly used to control 3D printer. For replacing mGiraffe's LCD control panel or building your own 3D printer, this product will be the best... Learn More

  11. MeEncoder Motor Driver

    MeEncoder Motor Driver

    (0 ratings)

    Rs 3,990.00

    Me Encoder Motor Driver can control up to 2 DC Encoder Motor. Precise speed and position of 2 motors can be set and get separately. The motor driver IC is TB6612, same as Me Dual DC Motor Driver. We provide a software for tuning P-I-D parameters of the driver, so that it could work well in different conditions. The reduction-gear ratio of the motor is... Learn More

  12. mCore - Main Control Board for mBot

    mCore - Main Control Board for mBot

    (0 ratings)

    Rs 3,990.00

    mCore is an easy-to-use main control board specially designed formBot. Based on Arduino Uno, mCore integrates various onboard sensors, such as buzzer, light sensor, RGB LED, etc., which provides you an easier way to start learning electronics. Learn More

  13. MeOrion Base UNO)

    MeOrion Base UNO)

    (0 ratings)

    Rs 3,990.00

    Makeblock Orion is an easy-to-use mainboard based on Arduino Uno with improvements for education. It provides eight RJ25 ports to connect to all the other Me series modules with color-labels, can save you from horrible pin-wiring and help you focus on inventor amazing projects. Makeblock Orion supports most of programming software (Arduino / Scratch /... Learn More

  14. MEDS150 Servo Motor
  15. 57BYG Stepper Motor

    57BYG Stepper Motor

    (0 ratings)

    Rs 2,990.00

    Makeblock 57BYG Stepper Motor has higher torque and better response speed than 42 stepper motor.  With Makeblock 57BYG Stepper Motor Braket, they may be easy to connet to Makeblock structural components. Learn More

  16. 555 High-speed CNC Motor 24V/10000RPM

    555 High-speed CNC Motor...

    (0 ratings)

    Rs 2,990.00

    Makeblock 555 High-speed CNC Motor 24V/10000RPM is assembled by high performance 555 motors and high-precision JTO drill chuck. It is usually used to be a mini cnc spindle, making a mini bench drill, a mini table saw and so on. Learn More

  17. 42BYG Stepper Motor
  18. Worm Geared Motor DC12.0V/6RPM

    Worm Geared Motor DC12.0V/6RPM

    (0 ratings)

    Rs 2,990.00

    Worm Geared Motor, a new type DC geared motor on Makeblock platform, is widely used in intelligent automation, DIY robots, and mechanical arms projects. This Worm Geared Motor, equipped with a customized 8mm output shaft with key slot, can be used to set up your projects easily. Learn More

  19. Optical Encoder Motor-25 9V/86RPM

    Optical Encoder Motor-25 9V/86RPM

    (0 ratings)

    Rs 2,990.00

    In contrast to the DC motor, a photoelectric encoder is added into the encoder motor for detecting speed which is fed back to the signal input terminal for PID control to implement servo control for the motor. Learn More

  20. Optical Encoder Motor-25 6V/185RPM

    Optical Encoder Motor-25 6V/185RPM

    (0 ratings)

    Rs 2,990.00

    In contrast to the DC motor, a photoelectric encoder is added into the encoder motor for detecting speed which is fed back to the signal input terminal for PID control to implement servo control for the motor.Learn More

  21. MG995 Standard Servo Pack

    MG995 Standard Servo Pack

    (0 ratings)

    Rs 2,990.00

    MG995 StandardServo Pack contains a  MG995 standard servo, a Servo Hub, a servo bracket and some hardwares.  MG995 servo is a simple, commonly used standard servo for  your mechanical needs. It comes with a stardard 3 pin power and control cable for easy using. With the servo hub and servo bracket, it may be convenient to connect the servo with other parts. Learn More

  22. Me 3-Axis Accelerometer and Gyro Sensor

    Me 3-Axis Accelerometer and Gyro...

    (0 ratings)

    Rs 2,990.00

    Me 3-Axis Accelerometer and Gyro Sensor is a motion processing module. It can use to measure the angular rate and the acceleration information of your robot or other devices. Me 3-Axis Accelerometer and Gyro Sensor is based on MPU-6050, it combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor™ (DMP) capable of processing... Learn More

  23. Me WiFi Module

    Me WiFi Module

    (0 ratings)

    Rs 2,990.00

    This module is a WiFi communication module. It can be used to communicate with a PC or a smart phone. Me WiFi can even be a WiFi Hotspot. Learn More

  24. Me Ultrasonic Sensor

    Me Ultrasonic Sensor

    (0 ratings)

    Rs 2,990.00

    The Me Ultrasonic Sensor V3.0 is the improvement version of Me Ultrasonic Sensor V2.0, better quality and perform more stable. Me Ultrosonic Sensor can be used to messure distance or obstacle avoidance , from 3cm to 4m. With the Arduino library we provide, users can get the distance directly and use the module easily. Learn More

  25. Me2H Microstep Driver

    Me2H Microstep Driver

    (0 ratings)

    Rs 2,990.00

    Makeblock 2H Microstep Driver is a type of 2-phase hybrid stepper motor driver. It is designed for driving 2-phase hybrid stepper motor of all kinds with 20mm to 42mm outside diameter and less than 2.0A phase current.   Learn More

  26. Me USB Host

    Me USB Host

    (0 ratings)

    Rs 2,990.00

    Me USB Host is an adapter for USB devices. You can use it to connect a Makeblock mainboard to a USB device, such as a USB joystick, a mouse, or a thumb drive. So you can control your robot with your own joystick or something else. Learn More

  27. Me Bluetooth Module (Dual Mode)

    Me Bluetooth Module (Dual Mode)

    (0 ratings)

    Rs 2,990.00

    Me Bluetooth Module is designed to communicate with devices  with buletooth function through specific software.We provide an Android App to use it. It is compatible with bluetooth 2.0 and 4.0. This module should be connected to PORT_5 on Makeblock Orion. If your device needs a passcode, please try 0000 or 1234. Learn More

  28. 2.4G Wireless Serial for mBot

    2.4G Wireless Serial for mBot

    (0 ratings)

    Rs 2,990.00

    This 2.4G Wireless Serial is designed for mBots to be used in classroom or workshop when many people use wireless communication simultaneously. It uses the same the techology as wireless mouse. With the feature of no pairing needed and no drivers needed, there is no signal interference when many modules work simultaneously. With two parts included: a... Learn More

  29. MG995 Standard Servo

    MG995 Standard Servo

    (0 ratings)

    Rs 2,290.00

    MG995 servo is a simple, commonly used standard servo for your mechanical needs such as robotic head, robotic arm. It comes with a stardard 3 pin power and control cable for easy using and metal gears for high torque. A Me RJ25 Adapter also help you to connect the servo with Me Baseboard or Makeblock Orion easily. Learn More

  30. Me TFT LCD Screen - 2.2 Inch

    Me TFT LCD Screen - 2.2 Inch

    (0 ratings)

    Rs 2,290.00

    This module can display geometric figures and characters. You can send commands through serial port to display.    Learn More

  31. Optical Encoder Motor-25 6V/185RPM

    Optical Encoder Motor-25 6V/185RPM

    (0 ratings)

    Rs 2,190.00

    In contrast to the DC motor, a photoelectric encoder is added into the encoder motor for detecting speed which is fed back to the signal input terminal for PID control to implement servo control for the motor. Learn More

  32. DC Motor-37 12V/50RPM

    DC Motor-37 12V/50RPM

    (0 ratings)

    Rs 1,890.00

    DC motors are the most commonly used motors in Makeblock Platform. With Makeblock DC Motor-25 Brackets, they may be easy to connet to Makeblock structural components. Learn More

  33. DC Motor-37 12V/200RPM

    DC Motor-37 12V/200RPM

    (0 ratings)

    Rs 1,890.00

    Dc motors are the most commonly used motors in Makeblock Platform. With Makeblock DC Motor-37 Brackets, they may be easy to connet to Makeblock structural components. Learn More

  34. 25mm DC Motor Pack-Blue

    25mm DC Motor Pack-Blue

    (0 ratings)

    Rs 1,890.00

    A 25mm diameter DC metal geared motor, together with a motor bracket, a shaft connector and a multipurpose wheel. The multipurpose wheel included can be used as a timing pully, or a wheel hub, or a tank wheel. This 25mm DC Motor Pack is Blue, if you need gold version please click here.  Learn More

  35. 25mm DC Motor Pack-Gold

    25mm DC Motor Pack-Gold

    (0 ratings)

    Rs 1,890.00

    A 25mm diameter DC metal geared motor, together with a motor bracket, a shaft connector and a multipurpose wheel. The multipurpose wheel included can be used as a timing pully, or a wheel hub, or a tank wheel. This 25mm DC Motor Pack is Blue, if you need gold version please click here.  Learn More

  36. Bluetooth Module for mBot

    Bluetooth Module for mBot

    (0 ratings)

    Rs 1,690.00

    This Bluetooth module is designed specially for individual users or family to play fun. You can use your smart phones or computers(Bluetooth enabled) to control the mBots wirelessly with this module. Learn More

  37. DC Motor-25 9V/700RPM

    DC Motor-25 9V/700RPM

    (0 ratings)

    Rs 1,590.00

    DC motor is the most commonly used motor on Makeblock platform. It is driven by direct current and is the ideal option to get things moving in all kinds of projects. Learn More

  38. DC Motor-25 6V/185RPM

    DC Motor-25 6V/185RPM

    (0 ratings)

    Rs 1,490.00

    Dc motors are the most commonly used motors in Makeblock Platform. With Makeblock DC Motor-25 Brackets, they may be easy to connet to Makeblock structural components. Learn More

  39. Mini Metal Gear Motor - N20 DC 12V/100RPM

    Mini Metal Gear Motor - N20 DC...

    (0 ratings)

    Rs 1,390.00

    Makeblock mini metal gear motor has a mini body, delicate gears and easy connector, and is widely used many DIY projects. Makeblock has three different revolving speed for your choice. Learn More

  40. 180 Optical Encoder Motor

    180 Optical Encoder Motor

    (0 ratings)

    Rs 1,390.00

    180 optical encoder motor is equipped with optical encoder which enables motor to control in high-accuracy. And the unique structure makes this motor compliable with various parts. Meanwhile, due to the special materials, it produces lower noise while running and promises large output torque. Learn More

  41. Me RGB LED

    Me RGB LED

    (0 ratings)

    Rs 1,290.00

    Me RGB LED V1.0 is a shiny Me series module which has 4 full color ws2812 RGB LEDs. With integrated chip, you can control each LED individually to adjust its brightness and creat any color by mixing different amounts of red, green, blue. It is cost effective for you using in shiny lighting interative project such as decorating your robot or room. Learn More

  42. LED RGB Strip-Addressable, Sealed(1M)

    LED RGB Strip-Addressable,...

    (0 ratings)

    Rs 1,290.00

    These are addressable RGB LED strips that come packed with 30 LEDs(1M) . Except the features of high brightness and full color, you can control each LED RGB individually, and each of these strips are enclosed by a flexible silicon jacket  to protect your LEDs . It is fashionable for you to create cool lighting effects for your home decorative, fish tank,  Learn More

  43. Me LED Matrix 8×16

    Me LED Matrix 8×16

    (0 ratings)

    Rs 1,190.00

    Have you ever imagined how vivid it would be if a dynamic face plate is added on your robot like mBot? Me LED Matrix 8x16 is an awesome place to start. You can create expressions, animations, or all sorts of other fun displays with them. Learn More

  44. Me UNO Shield

    Me UNO Shield

    (0 ratings)

    Rs 1,190.00

    This module is a shield of Arduino UNO. It can turn Arduino pins into Makeblock RJ25 ports. You can connect Arduino UNO with Makeblock electronic modules. This shield provides a stable power, so it can drive many servos and motors.   Learn More

  45. Water Pump Motor - DC 12V/370-04PM

    Water Pump Motor - DC 12V/370-04PM

    (0 ratings)

    Rs 1,190.00

    Makeblock water pump motor - DC 12V/370-04PM has a 12V motor and a tough thermoplastic body, it is widely used for for water priming pump, automotive pump experiment pump bonsai rockery, DIY projects and so on. Learn More

  46. Me Infrared Receiver Decode

    Me Infrared Receiver Decode

    (0 ratings)

    Rs 1,190.00

    The Makeblock Me series modules are designed to be simple to wire, easy to program, the controller is compatible with Arduino, each Me-modules comes with an Arduino library for easy programming.Me Infrared  Receiver Decode module is designed for receiving infrared signals and controlling the robotics from the infrared remote control. Learn More

  47. MegaPi Encoder/DC Motor Driver

    MegaPi Encoder/DC Motor Driver

    (0 ratings)

    Rs 1,190.00

    This encoder motor is capable of driving two DC motors or one encoder motor. It has 16 pins, allowing you to connect with MegaPi by simply plugging in. The motor driver IC on the board is TB6612, which is a high efficiency MOSFET driver with low heat dissipation. Overcurrent protection included to prevent the driver IC from burning out. Learn More

  48. MegaPi Stepper Motor Driver

    MegaPi Stepper Motor Driver

    (0 ratings)

    Rs 1,190.00

    This module is designed to drive stepper motors. It uses DRV8825 chip and has a maximum driving current of 2.5A. The DRV8825 is a complete micro-stepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full, 1/2, 1/4, 1/8/ 1/16, or 1/32 step modes. We add an on-board potentiometer, so you can... Learn More

  49. Me Compass

    Me Compass

    (0 ratings)

    Rs 1,190.00

    This module is a 3-axis digital compass. The main chip is Honeywell HMC5883L. On-board regulator provides stable power for HMC5883L. We provide a library to initialize, calibrate, and read the data. Learn More

  50. Me Line Follower

    Me Line Follower

    (0 ratings)

    Rs 1,190.00

    Me Line Follower V2.2 module is designed for the line following robotics. It has two sensors on the module and each sensor contains two parts – an IR emitting LED and an IR sensitive phototransistor. It can output digital signal to Arduino so the robot can reliably follow a black line on a white background, or vice versa. Learn More

Grid List