Robotic Accessories

Grid List

  1. MegaPi - Born to Motion Control

    MegaPi - Born to Motion Control

    (0 ratings)

    Rs 11.31

    MegaPi is a microcontroller board based on ATmega2560. With abundant motor driver interfaces, it can control and combine different kinds of motors rapidly, drive 10 servos and 8 DC motors/ 4 stepper motors simultaneously and have a maximum output current of 10A. Learn More

  2. Me Auriga

    Me Auriga

    (0 ratings)

    Rs 5,990.00

    Me Auriga is the updated version of Orion which equipped with several sensors. The previous two red ports have been changed into four but remain the functions. Also, PORT5 is isolated only with serial communication function. So it can't be used to update program and is only for communication Learn More

  3. mCore - Main Control Board for mBot

    mCore - Main Control Board for mBot

    (0 ratings)

    Rs 3,990.00

    mCore is an easy-to-use main control board specially designed formBot. Based on Arduino Uno, mCore integrates various onboard sensors, such as buzzer, light sensor, RGB LED, etc., which provides you an easier way to start learning electronics. Learn More

  4. MeOrion Base UNO)

    MeOrion Base UNO)

    (0 ratings)

    Rs 3,990.00

    Makeblock Orion is an easy-to-use mainboard based on Arduino Uno with improvements for education. It provides eight RJ25 ports to connect to all the other Me series modules with color-labels, can save you from horrible pin-wiring and help you focus on inventor amazing projects. Makeblock Orion supports most of programming software (Arduino / Scratch /... Learn More

  5. Me2H Microstep Driver

    Me2H Microstep Driver

    (0 ratings)

    Rs 2,990.00

    Makeblock 2H Microstep Driver is a type of 2-phase hybrid stepper motor driver. It is designed for driving 2-phase hybrid stepper motor of all kinds with 20mm to 42mm outside diameter and less than 2.0A phase current.   Learn More

  6. MeEncoder Motor Driver

    MeEncoder Motor Driver

    (0 ratings)

    Rs 3,990.00

    Me Encoder Motor Driver can control up to 2 DC Encoder Motor. Precise speed and position of 2 motors can be set and get separately. The motor driver IC is TB6612, same as Me Dual DC Motor Driver. We provide a software for tuning P-I-D parameters of the driver, so that it could work well in different conditions. The reduction-gear ratio of the motor is... Learn More

  7. Me High-Power Encoder Motor Driver

    Me High-Power Encoder Motor Driver

    (0 ratings)

    Rs 5,990.00

    This module is the newer version of the original Me Encoder Motor Driver, which is capable of driving two encoder motors simultaneously. The chip inside this driver integrates the PID control algorithms which can be used to control and feed back the speed and the movement of the motors. Learn More

  8. MegaPi Encoder/DC Motor Driver

    MegaPi Encoder/DC Motor Driver

    (0 ratings)

    Rs 1,190.00

    This encoder motor is capable of driving two DC motors or one encoder motor. It has 16 pins, allowing you to connect with MegaPi by simply plugging in. The motor driver IC on the board is TB6612, which is a high efficiency MOSFET driver with low heat dissipation. Overcurrent protection included to prevent the driver IC from burning out. Learn More

  9. MegaPi Stepper Motor Driver

    MegaPi Stepper Motor Driver

    (0 ratings)

    Rs 1,190.00

    This module is designed to drive stepper motors. It uses DRV8825 chip and has a maximum driving current of 2.5A. The DRV8825 is a complete micro-stepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full, 1/2, 1/4, 1/8/ 1/16, or 1/32 step modes. We add an on-board potentiometer, so you can... Learn More

  10. AC to DC 12V 2A Wall Adapter Power Supply For Arduino
  11. Universal Plug Adapter for UK, Hong Kong, Singapore (Type G)
  12. Universal Plug Adapter for Germany, France, Europe, Russia (Type E/F)
  13. Universal Plug Adapter for Europe (Type C)
  14. Battery Holder for (6)AA
  15. Me Shutter

    Me Shutter

    (0 ratings)

    Rs 890.00

    Me Shutter V1.0 is a Me series module used to automatically take pictures with your DSLR camera.With it, You can shoot high speed photos, or use for intervalometer to make  ”Timelapse”  videos and pictures in an Arduino project. Learn More

  16. DC Frame Type Solenoid HCNE1-0530

    DC Frame Type Solenoid HCNE1-0530

    (0 ratings)

    Rs 690.00

    Open Frame Solenoids are a basic, opened-coil type of linear motion solenoids. Due to their simpledesign structure, they are less costly, Learn More

  17. Me 3-Axis Accelerometer and Gyro Sensor

    Me 3-Axis Accelerometer and Gyro...

    (0 ratings)

    Rs 2,990.00

    Me 3-Axis Accelerometer and Gyro Sensor is a motion processing module. It can use to measure the angular rate and the acceleration information of your robot or other devices. Me 3-Axis Accelerometer and Gyro Sensor is based on MPU-6050, it combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor™ (DMP) capable of processing... Learn More

  18. Me Angular Sensor

    Me Angular Sensor

    (0 ratings)

    Rs 490.00

    Being connected with other Makeblock parts, Me Angular Sensor is designed to achieve the goal of detecting the angle value of a link mechanism or the angle value of a joint. Learn More

  19. Me Compass

    Me Compass

    (0 ratings)

    Rs 1,190.00

    This module is a 3-axis digital compass. The main chip is Honeywell HMC5883L. On-board regulator provides stable power for HMC5883L. We provide a library to initialize, calibrate, and read the data. Learn More

  20. Me Flame Sensor

    Me Flame Sensor

    (0 ratings)

    Rs 690.00

    Me Flame Sensor can be used to detect fire source or light source with wavelength in the range of 760 nm to 1100 nm. Its detection angle is up to 60 degrees, and detection accuracy can be adjusted. When the flame is detected, its blue indicator will light on. It can be applied to the safety monitoring projects such as fire-fighting robot and flame alarm.  Learn More

  21. Me Gas Sensor

    Me Gas Sensor

    (0 ratings)

    Rs 890.00

    e Gas Sensor includes a smoke sensor of type MQ2 which has good repeatability, long-term stability, short response time, and durable working performance. It is often used as a gas leakage monitoring device in family and factory, and suitable for detecting Liquefied Natural Gas (LNG), butane, propane, methane, alcohol, hydrogen, smoke, etc.   Learn More

  22. Me Light Sensor

    Me Light Sensor

    (0 ratings)

    Rs 790.00

    Me Light Sensor is used to detect the light intensity. It's like a Me Light and Grayscale Sensor without the white LED. Almost the same function and usage, but a little cheaper. You can use it to make a intelligent dimming lamp, a laser communication system, or something cooler. The library is same as Me Light and Grayscale Sensor. Learn More

  23. Me Line Follower

    Me Line Follower

    (0 ratings)

    Rs 1,190.00

    Me Line Follower V2.2 module is designed for the line following robotics. It has two sensors on the module and each sensor contains two parts – an IR emitting LED and an IR sensitive phototransistor. It can output digital signal to Arduino so the robot can reliably follow a black line on a white background, or vice versa. Learn More

  24. Me PIR Motion Sensor

    Me PIR Motion Sensor

    (0 ratings)

    Rs 790.00

    Me PIR sensors are used to detect motion from animals/ humans from about 6m away. If anyone moved in that range, the sensor outputs HIGH on its SIG pin. With a potentiometersoldered on its circuit board, you can adjust its detecting range according to your need. Here are some ideas for application: motion detecting, thief-guarding system, automation switch. Learn More

  25. Me Slide Potentiometer

    Me Slide Potentiometer

    (0 ratings)

    Rs 490.00

    Me Slide Potentiometer is one type of potentiometer that can be used to control volume, light intensity, motor speed, movement control, etc. in interactive projects. Learn More

  26. Me Sound Sensor

    Me Sound Sensor

    (0 ratings)

    Rs 690.00

    Me Sound Sensor is designed to detect the intensity of sound in the surrounding environment. You can use it in sound interative project such as a voice operated switch or build a dancing robot with music. Based on the power amplifier LM386 and the electret microphone, it can output analog values ranging from 0 to 1023. Due to a potentiometer,  Learn More

  27. Me Temperature and Humidity Sensor

    Me Temperature and Humidity Sensor

    (0 ratings)

    Rs 890.00

    Me Temperature and Humidity Sensor is a sensor that contains a calibrated digital signal output. It adopts specific digital module collecting technology and temperature-humidity sensing technology to ensure high reliability and excellent long-term stability. This module can measure the temperature from 0℃ to 50℃. Users can use it to build a cost-effective... Learn More

  28. Me Temperature Sensor-Waterproof(DS18B20)

    Me Temperature...

    (0 ratings)

    Rs 790.00

    This is the temperature sensor based on chip DS18B20 consisting of a waterproof probe and long wire shape, which is perfect for immersive temperature detectionor detectingg something far away.The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central... Learn More

  29. Me Touch Sensor

    Me Touch Sensor

    (0 ratings)

    Rs 696.20

    Me Touch Sensor is a capacitive touch sensor based on TTP223-BA6. It will be triggered by finger touch. You can also connect the "TOUCH" pinhole to some metal construction and touch the metal to trigger the sensor. The sensitivity is fixed to a proper level. If you need to adjust it to fit some special case, you can try to change the value of R3 and C4.  Learn More

  30. Me Ultrasonic Sensor

    Me Ultrasonic Sensor

    (0 ratings)

    Rs 2,990.00

    The Me Ultrasonic Sensor V3.0 is the improvement version of Me Ultrasonic Sensor V2.0, better quality and perform more stable. Me Ultrosonic Sensor can be used to messure distance or obstacle avoidance , from 3cm to 4m. With the Arduino library we provide, users can get the distance directly and use the module easily. Learn More

  31. Photoelectrical Limit Switch Sensor

    Photoelectrical Limit Switch Sensor

    (0 ratings)

    Rs 350.00

    This module is initially designed for mGiraffe. Connect it to switching module X_STOP, Y_STOP and Z_STOP with dedicated cables to limit the movement of 3 stepper motors. For replacing mGiraffe's photoelectrical limit switch sensor or building your own 3D printer, this product will be the best choice for you. Learn More

  32. 2.4G Wireless Serial for mBot

    2.4G Wireless Serial for mBot

    (0 ratings)

    Rs 2,990.00

    This 2.4G Wireless Serial is designed for mBots to be used in classroom or workshop when many people use wireless communication simultaneously. It uses the same the techology as wireless mouse. With the feature of no pairing needed and no drivers needed, there is no signal interference when many modules work simultaneously. With two parts included: a... Learn More

  33. Bluetooth Module for mBot

    Bluetooth Module for mBot

    (0 ratings)

    Rs 1,690.00

    This Bluetooth module is designed specially for individual users or family to play fun. You can use your smart phones or computers(Bluetooth enabled) to control the mBots wirelessly with this module. Learn More

  34. Me Bluetooth Module (Dual Mode)

    Me Bluetooth Module (Dual Mode)

    (0 ratings)

    Rs 2,990.00

    Me Bluetooth Module is designed to communicate with devices  with buletooth function through specific software.We provide an Android App to use it. It is compatible with bluetooth 2.0 and 4.0. This module should be connected to PORT_5 on Makeblock Orion. If your device needs a passcode, please try 0000 or 1234. Learn More

  35. Me Infrared Receiver Decode

    Me Infrared Receiver Decode

    (0 ratings)

    Rs 1,190.00

    The Makeblock Me series modules are designed to be simple to wire, easy to program, the controller is compatible with Arduino, each Me-modules comes with an Arduino library for easy programming.Me Infrared  Receiver Decode module is designed for receiving infrared signals and controlling the robotics from the infrared remote control. Learn More

  36. Me USB Host

    Me USB Host

    (0 ratings)

    Rs 2,990.00

    Me USB Host is an adapter for USB devices. You can use it to connect a Makeblock mainboard to a USB device, such as a USB joystick, a mouse, or a thumb drive. So you can control your robot with your own joystick or something else. Learn More

  37. Me WiFi Module

    Me WiFi Module

    (0 ratings)

    Rs 2,990.00

    This module is a WiFi communication module. It can be used to communicate with a PC or a smart phone. Me WiFi can even be a WiFi Hotspot. Learn More

  38. LED RGB Strip-Addressable, Sealed(0.5M)

    LED RGB Strip-Addressable,...

    (0 ratings)

    Rs 690.00

    These are addressable RGB LED strips that come packed with 15 LEDs(0.5M) or 30 LEDs(1M) . Except the features of high brightness and full color, you can control each LED RGB individually, and each of these strips are enclosed by a flexible silicon jacket  to protect your LEDs . It is fashionable for you to create cool lighting effects for your home... Learn More

  39. LED RGB Strip-Addressable, Sealed(1M)

    LED RGB Strip-Addressable,...

    (0 ratings)

    Rs 1,290.00

    These are addressable RGB LED strips that come packed with 30 LEDs(1M) . Except the features of high brightness and full color, you can control each LED RGB individually, and each of these strips are enclosed by a flexible silicon jacket  to protect your LEDs . It is fashionable for you to create cool lighting effects for your home decorative, fish tank,  Learn More

  40. Me 7-Segment Serial Display - Red

    Me 7-Segment Serial Display - Red

    (0 ratings)

    Rs 890.00

    Me 7-Segment Serial Display is a classic 4-digit common anode 7-segment display, it usually used to display numbers and a few special characters. You can easily use it in your robot project to show speed, time, the value of sensors, or scores. Me 7-Segment Serial Display is based on chip TM1637, you can control each segment and decimal point individually.  Learn More

  41. Me LED Matrix 8×16

    Me LED Matrix 8×16

    (0 ratings)

    Rs 1,190.00

    Have you ever imagined how vivid it would be if a dynamic face plate is added on your robot like mBot? Me LED Matrix 8x16 is an awesome place to start. You can create expressions, animations, or all sorts of other fun displays with them. Learn More

  42. Me RGB LED

    Me RGB LED

    (0 ratings)

    Rs 1,290.00

    Me RGB LED V1.0 is a shiny Me series module which has 4 full color ws2812 RGB LEDs. With integrated chip, you can control each LED individually to adjust its brightness and creat any color by mixing different amounts of red, green, blue. It is cost effective for you using in shiny lighting interative project such as decorating your robot or room. Learn More

  43. Me TFT LCD Screen - 2.2 Inch

    Me TFT LCD Screen - 2.2 Inch

    (0 ratings)

    Rs 2,290.00

    This module can display geometric figures and characters. You can send commands through serial port to display.    Learn More

  44. LCD Control Panel

    LCD Control Panel

    (0 ratings)

    Rs 3,990.00

    LCD Control Panel is one of the electronic modules of mGiraffe. Connect it to switching modules EXP1 and EXP2. The LCD Control Panel consists of a LCD module, a rotary encoder, a buzzer and a TF card slot, and is mainly used to control 3D printer. For replacing mGiraffe's LCD control panel or building your own 3D printer, this product will be the best... Learn More

  45. LED Light

    LED Light

    (0 ratings)

    Rs 170.00

    This module is originally designed for mGiraffe. You have to connect it to switching module with a dedicated cable. The LED light is mainly used for the lighting of print head on 3D printer. For replacing mGiraffe's LED light or building your own 3D printer, this product will be the best choice for you. Learn More

  46. IR Controller

    IR Controller

    (0 ratings)

    Rs 390.00

    The IR controller is designed to wirelessly control robots and other mechanical device. Working with many common IR receiver, this IR controller provides you a simple and easy way to control your devices without touching it! Learn More

  47. Me 4 Button

    Me 4 Button

    (0 ratings)

    Rs 590.00

    Me 4 Button V1.0 is great for all kinds of projects, can work as function button or direction button to control your robots. There are 4 momentary buttons on the PCB board which have a great “click” to them. They all share an analog output and different analog values reflect different buttons. You can easily connect it to Me BaseBoard V1.0 or Me... Learn More

  48. Me Joystick

    Me Joystick

    (0 ratings)

    Rs 690.00

    Me-Joystick V1.1 is a Me series module used for controlling your robot in the X-axis and Y-axis direction.It has a comfortable cup-type knob for you to move smoothly.Makeblock Me-Joystick V1.1 can easily be connected to Makeblock Me-BaseBoard V1.0 by 6P6C RJ25 cables. Check the step-by-step tutorial about how to control mBot with wirelss Joystick. Learn More

  49. Me Micro Switch A

    Me Micro Switch A

    (0 ratings)

    Rs 390.00

    Me Micro Switch is a physical switch. It sends a signal to the controller when it is triggered. It is perfect to use in conjunction with makeblock components. The Me-Micro Switch should be used with Me-RJ25 Adapter. Make sure Me RJ25Adapter V2.0  has been connected toMe-BaseShieldV2.0 or Me-BaseBoardV1.0  correctly. Learn More

  50. Me Micro Switch B

    Me Micro Switch B

    (0 ratings)

    Rs 390.00

    Me Micro Switch is a physical switch. It sends a signal to the controller when it is triggered. It is perfect to use in conjunction with makeblock components. The Me-Micro Switch should be used with Me-RJ25 Adapter. Make sure Me RJ25Adapter V2.0  has been connected to Me-BaseShieldV2.0 or Me-BaseBoardV1.0  correctly. Learn More

Grid List