Educational Robots

Grid List

  1. mBot V1.1-Blue

    mBot V1.1-Blue

    (0 ratings)

    Rs 10,990.00

    mBot ( Bluetooth Version) is an all-in-one solution to enjoy the hands-on experience of programming, electronics, and robotics. Working with mBlock inspired by Scratch 2.0, connecting with computers or smart devices via Bluetooth or 2.4G (by different version), this easy-to-assemble mBot provides infinite possibilities for you to learn STEM (Science,... Learn More

  2. mElephant 3D Printer

    mElephant 3D Printer

    (0 ratings)

    Rs 65,990.00

    Both accuracy and precision matter in 3D Printing. mElephant has the timing belt drive and lead-screw drive in the same time, it provides high-accuracy with XY resolution as 0.1mm, and layer resolution as 0.1-0.3mm, which means it can produce exactly the 3D printing you design. Learn More

  3. mGiraffe 3D Printer

    mGiraffe 3D Printer

    (0 ratings)

    Rs 65,990.00

    mGiraffe is a new type of delta 3D printer DIY kit based on Makeblock platform. Consisting of an open hexagon linkage structure and powerful electronic control system, mGiraffe is devoted to bring you extraordinary 3D printing experience. Learn More

  4. XYPlotter Robot Kit

    XYPlotter Robot Kit

    (0 ratings)

    Rs 32,990.00

    XY Plotter Robot Kit is a drawing robot that can move a pen or other instrument to draw digital artwork on flat surface. It can also be developed into a laser engraver by adding the Laser Engraver Upgrade Pack. Learn More

  5. mBotRanger Transformable

    mBotRanger Transformable

    (0 ratings)

    Rs 20,990.00

    mBot Ranger Robot Kit is a three-in-one STEM educational robot kit which supports 3 building forms: robot tank, three-wheeled racing car, and a self-balance car. Program & Control mBot Ranger via iPad, tablets, or laptop to start your exploration! Learn More

  6. Advanced Robot Kit

    Advanced Robot Kit

    (0 ratings)

    Rs 25,990.00

    Advanced Robot Kit-Blue (No Electronics) This kit can be used to build a moving platform, wheeled robot or tracked robot, different wheel configuration and track configuration are avaliable. Learn More

  7. Music Robot Kit V2.0

    Music Robot Kit V2.0

    (0 ratings)

    Rs 21,990.00

    Music Robot Kit V2.0 (With Electronics) The music robot kit uses an ultrasonic module to detect the position of gestures, then the stepper motor will be drove to move Xylophone's hammer. When the hammer moves to the right bar, robot will control electromagnet to hit the bar. Users can also control the music robot through upper computer, or play your own... Learn More

  8. Ultimate Robot Kit

    Ultimate Robot Kit

    (0 ratings)

    Rs 39,990.00

    Ultimate Robot Kit-Blue (No Electronics) Makeblock Ultimate Kits covers the functions of Makeblock Starter Kit and Makeblock Advanced Kit. Adding more beams and other mechanical parts. Sliders and V-Slot bearing can be used to build flexible linear motion mechanism, Makeblock high torque digital servo included, can be used to build 2-DOF robot arm. Learn More

  9. Ultimate2 10in1 Kit

    Ultimate2 10in1 Kit

    (0 ratings)

    Rs 43,990.00

    Ultimate 2.0 is a flagship robot kit based on Makeblock platform with rich features and strong compatibility. Whether you are an enthusiast of Raspberry Pi or Arduino, a mechanical or electronics engineer, a teacher, or a student, it helps you learn the knowledge of mechanical structures, electronic modules and programming skill with ease Learn More

  10. MiddleSchool Education Kit
  11. Electronic Addon Kit

    Electronic Addon Kit

    (0 ratings)

    Rs 3,390.00

    The Electronic Add-on Pack is to expand on your Starter Robot Kit. There are 8 electronic modules in it. With this add-on pack and Starter Kit, you can create a lot of cool project. You can also implement several projects in Inventor Electronic Kit. Learn More

  12. Inventor Kit

    Inventor Kit

    (0 ratings)

    Rs 14,990.00

    The Makeblock Inventor Electronic Kit is a modular electronic platform for quick prototyping. This kit contains 12 sensors and actuators, each with a color-coded connector to simplify wiring. Each module comes with Arduino library for quick programming. Learn More

  13. Laser Engraver Pack

    Laser Engraver Pack

    (0 ratings)

    Rs 13,990.00

    Laser Engraver Upgrade Pack uses a beam of light to cut, engrave, and shape designs from a variety of material Learn More

  14. Linear Motion Guide

    Linear Motion Guide

    (0 ratings)

    Rs 14,990.00

    Makeblock Linear Motion Guide Module Pack is a ball linear guide which can be assembled as a linear motion guide robot. The pack can be assembled as a liner motion guide with electronic or without electronic.  Learn More

  15. Robotic Arm Addon

    Robotic Arm Addon

    (0 ratings)

    Rs 9,990.00

    Robotic Arm Add-on Pack for Starter Robot Kit-Blue Robot Arm Add-on Pack serves to transform your Starter Robot Kit to a robotic-arm tank. It contains all parts you need for building a robotic arms, including DC Motor-37, Robot Gripper, beams, timing pulleys, and hardware. Learn More

  16. mBot Add-on Pack-Six-legged Robot

    mBot Add-on Pack-Six-legged Robot

    (0 ratings)

    Rs 2,990.00

    mBot six-legged robot is a 3-in-1 expansion pack based on mBot. You can construct "Beetle", "Mantis" and "Crazy Frog" with mBot and the parts inside the pack.The mBot six-legged robot makes mBot more vivacious and enjoyable. Let's get your six-legged robot move! Learn More

  17. mBot Add-on Pack-Servo Pack

    mBot Add-on Pack-Servo Pack

    (0 ratings)

    Rs 2,990.00

    mBot servo pack is a 3-in-1 pack based on mBot. You can construct "Dancing Cat", "Head-Shaking Cat" and "Light-Emitting Cat" with the components and mBot in the pack.mBot servo pack makes mBot more vivacious and enjoyable, which is of benefit to children's creative thinking. Learn More

  18. Robot Gripper

    Robot Gripper

    (0 ratings)

    Rs 3,990.00

    Robot Gripper is a simple and durable robotics kit that is great for "getting a grip" on pretty much any robotics project Learn More

  19.  Robot Motion Pack-Blue

    Robot Motion Pack-Blue

    (0 ratings)

    Rs 4,990.00

    This Kit contains frequently-used parts in  building motion mechanisms. Learn More

  20. Robot Motion Pack-Gold
  21. MegaPi - Born to Motion Control

    MegaPi - Born to Motion Control

    (0 ratings)

    Rs 11.31

    MegaPi is a microcontroller board based on ATmega2560. With abundant motor driver interfaces, it can control and combine different kinds of motors rapidly, drive 10 servos and 8 DC motors/ 4 stepper motors simultaneously and have a maximum output current of 10A. Learn More

  22. Me Auriga

    Me Auriga

    (0 ratings)

    Rs 5,990.00

    Me Auriga is the updated version of Orion which equipped with several sensors. The previous two red ports have been changed into four but remain the functions. Also, PORT5 is isolated only with serial communication function. So it can't be used to update program and is only for communication Learn More

  23. mCore - Main Control Board for mBot

    mCore - Main Control Board for mBot

    (0 ratings)

    Rs 3,990.00

    mCore is an easy-to-use main control board specially designed formBot. Based on Arduino Uno, mCore integrates various onboard sensors, such as buzzer, light sensor, RGB LED, etc., which provides you an easier way to start learning electronics. Learn More

  24. MeOrion Base UNO)

    MeOrion Base UNO)

    (0 ratings)

    Rs 3,990.00

    Makeblock Orion is an easy-to-use mainboard based on Arduino Uno with improvements for education. It provides eight RJ25 ports to connect to all the other Me series modules with color-labels, can save you from horrible pin-wiring and help you focus on inventor amazing projects. Makeblock Orion supports most of programming software (Arduino / Scratch /... Learn More

  25. Me2H Microstep Driver

    Me2H Microstep Driver

    (0 ratings)

    Rs 2,990.00

    Makeblock 2H Microstep Driver is a type of 2-phase hybrid stepper motor driver. It is designed for driving 2-phase hybrid stepper motor of all kinds with 20mm to 42mm outside diameter and less than 2.0A phase current.   Learn More

  26. MeEncoder Motor Driver

    MeEncoder Motor Driver

    (0 ratings)

    Rs 3,990.00

    Me Encoder Motor Driver can control up to 2 DC Encoder Motor. Precise speed and position of 2 motors can be set and get separately. The motor driver IC is TB6612, same as Me Dual DC Motor Driver. We provide a software for tuning P-I-D parameters of the driver, so that it could work well in different conditions. The reduction-gear ratio of the motor is... Learn More

  27. Me High-Power Encoder Motor Driver

    Me High-Power Encoder Motor Driver

    (0 ratings)

    Rs 5,990.00

    This module is the newer version of the original Me Encoder Motor Driver, which is capable of driving two encoder motors simultaneously. The chip inside this driver integrates the PID control algorithms which can be used to control and feed back the speed and the movement of the motors. Learn More

  28. MegaPi Encoder/DC Motor Driver

    MegaPi Encoder/DC Motor Driver

    (0 ratings)

    Rs 1,190.00

    This encoder motor is capable of driving two DC motors or one encoder motor. It has 16 pins, allowing you to connect with MegaPi by simply plugging in. The motor driver IC on the board is TB6612, which is a high efficiency MOSFET driver with low heat dissipation. Overcurrent protection included to prevent the driver IC from burning out. Learn More

  29. MegaPi Stepper Motor Driver

    MegaPi Stepper Motor Driver

    (0 ratings)

    Rs 1,190.00

    This module is designed to drive stepper motors. It uses DRV8825 chip and has a maximum driving current of 2.5A. The DRV8825 is a complete micro-stepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full, 1/2, 1/4, 1/8/ 1/16, or 1/32 step modes. We add an on-board potentiometer, so you can... Learn More

  30. AC to DC 12V 2A Wall Adapter Power Supply For Arduino
  31. Universal Plug Adapter for UK, Hong Kong, Singapore (Type G)
  32. Universal Plug Adapter for Germany, France, Europe, Russia (Type E/F)
  33. Universal Plug Adapter for Europe (Type C)
  34. Battery Holder for (6)AA
  35. Me Shutter

    Me Shutter

    (0 ratings)

    Rs 890.00

    Me Shutter V1.0 is a Me series module used to automatically take pictures with your DSLR camera.With it, You can shoot high speed photos, or use for intervalometer to make  ”Timelapse”  videos and pictures in an Arduino project. Learn More

  36. DC Frame Type Solenoid HCNE1-0530

    DC Frame Type Solenoid HCNE1-0530

    (0 ratings)

    Rs 690.00

    Open Frame Solenoids are a basic, opened-coil type of linear motion solenoids. Due to their simpledesign structure, they are less costly, Learn More

  37. Me 3-Axis Accelerometer and Gyro Sensor

    Me 3-Axis Accelerometer and Gyro...

    (0 ratings)

    Rs 2,990.00

    Me 3-Axis Accelerometer and Gyro Sensor is a motion processing module. It can use to measure the angular rate and the acceleration information of your robot or other devices. Me 3-Axis Accelerometer and Gyro Sensor is based on MPU-6050, it combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor™ (DMP) capable of processing... Learn More

  38. Me Angular Sensor

    Me Angular Sensor

    (0 ratings)

    Rs 490.00

    Being connected with other Makeblock parts, Me Angular Sensor is designed to achieve the goal of detecting the angle value of a link mechanism or the angle value of a joint. Learn More

  39. Me Compass

    Me Compass

    (0 ratings)

    Rs 1,190.00

    This module is a 3-axis digital compass. The main chip is Honeywell HMC5883L. On-board regulator provides stable power for HMC5883L. We provide a library to initialize, calibrate, and read the data. Learn More

  40. Me Flame Sensor

    Me Flame Sensor

    (0 ratings)

    Rs 690.00

    Me Flame Sensor can be used to detect fire source or light source with wavelength in the range of 760 nm to 1100 nm. Its detection angle is up to 60 degrees, and detection accuracy can be adjusted. When the flame is detected, its blue indicator will light on. It can be applied to the safety monitoring projects such as fire-fighting robot and flame alarm.  Learn More

  41. Me Gas Sensor

    Me Gas Sensor

    (0 ratings)

    Rs 890.00

    e Gas Sensor includes a smoke sensor of type MQ2 which has good repeatability, long-term stability, short response time, and durable working performance. It is often used as a gas leakage monitoring device in family and factory, and suitable for detecting Liquefied Natural Gas (LNG), butane, propane, methane, alcohol, hydrogen, smoke, etc.   Learn More

  42. Me Light Sensor

    Me Light Sensor

    (0 ratings)

    Rs 790.00

    Me Light Sensor is used to detect the light intensity. It's like a Me Light and Grayscale Sensor without the white LED. Almost the same function and usage, but a little cheaper. You can use it to make a intelligent dimming lamp, a laser communication system, or something cooler. The library is same as Me Light and Grayscale Sensor. Learn More

  43. Me Line Follower

    Me Line Follower

    (0 ratings)

    Rs 1,190.00

    Me Line Follower V2.2 module is designed for the line following robotics. It has two sensors on the module and each sensor contains two parts – an IR emitting LED and an IR sensitive phototransistor. It can output digital signal to Arduino so the robot can reliably follow a black line on a white background, or vice versa. Learn More

  44. Me PIR Motion Sensor

    Me PIR Motion Sensor

    (0 ratings)

    Rs 790.00

    Me PIR sensors are used to detect motion from animals/ humans from about 6m away. If anyone moved in that range, the sensor outputs HIGH on its SIG pin. With a potentiometersoldered on its circuit board, you can adjust its detecting range according to your need. Here are some ideas for application: motion detecting, thief-guarding system, automation switch. Learn More

  45. Me Slide Potentiometer

    Me Slide Potentiometer

    (0 ratings)

    Rs 490.00

    Me Slide Potentiometer is one type of potentiometer that can be used to control volume, light intensity, motor speed, movement control, etc. in interactive projects. Learn More

  46. Me Sound Sensor

    Me Sound Sensor

    (0 ratings)

    Rs 690.00

    Me Sound Sensor is designed to detect the intensity of sound in the surrounding environment. You can use it in sound interative project such as a voice operated switch or build a dancing robot with music. Based on the power amplifier LM386 and the electret microphone, it can output analog values ranging from 0 to 1023. Due to a potentiometer,  Learn More

  47. Me Temperature and Humidity Sensor

    Me Temperature and Humidity Sensor

    (0 ratings)

    Rs 890.00

    Me Temperature and Humidity Sensor is a sensor that contains a calibrated digital signal output. It adopts specific digital module collecting technology and temperature-humidity sensing technology to ensure high reliability and excellent long-term stability. This module can measure the temperature from 0℃ to 50℃. Users can use it to build a cost-effective... Learn More

  48. Me Temperature Sensor-Waterproof(DS18B20)

    Me Temperature...

    (0 ratings)

    Rs 790.00

    This is the temperature sensor based on chip DS18B20 consisting of a waterproof probe and long wire shape, which is perfect for immersive temperature detectionor detectingg something far away.The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central... Learn More

  49. Me Touch Sensor

    Me Touch Sensor

    (0 ratings)

    Rs 696.20

    Me Touch Sensor is a capacitive touch sensor based on TTP223-BA6. It will be triggered by finger touch. You can also connect the "TOUCH" pinhole to some metal construction and touch the metal to trigger the sensor. The sensitivity is fixed to a proper level. If you need to adjust it to fit some special case, you can try to change the value of R3 and C4.  Learn More

  50. Me Ultrasonic Sensor

    Me Ultrasonic Sensor

    (0 ratings)

    Rs 2,990.00

    The Me Ultrasonic Sensor V3.0 is the improvement version of Me Ultrasonic Sensor V2.0, better quality and perform more stable. Me Ultrosonic Sensor can be used to messure distance or obstacle avoidance , from 3cm to 4m. With the Arduino library we provide, users can get the distance directly and use the module easily. Learn More

Grid List